News

The firing temperature of secondary high-alumina bricks is 1410℃, the softening point under pressure is around 1430℃, and the operating temperature...

A tilting furnace is a movable furnace body with a refractory lining that can operate continuously. The furnace cover and furnace nozzle of this ty...

For the lining bricks of lime rotary kilns, when it comes to silicon-magnesia bricks and special phosphate bricks, special phosphate bricks are mor...

The rich manganese slag molten iron ladle forms in an acidic environment, and the slag as a whole is subject to weak acid and neutral erosion, whil...

Recently, there has been a lot of buzz online about the story of natural flake graphite. Those seeking to increase their online traffic are flockin...

The lining of the molten iron ladle is made of refractory bricks or refractory mortar, and the choice depends on the number of furnace runs.

When high-alumina refractory mortar dries too quickly at the construction site, it makes it impossible to form adhesion between the refractory bric...

The ring tiles for the rotary kiln lining are reserved according to the size of the user's ring tile ring, which makes it convenient for the lining...

The problem of cracking of refractory concrete is a complex issue, but many factors are closely related, including production processes, raw materi...

During the construction process of refractory mortar, mixing is an important step. It should be carried out according to the following steps:

Alumina bubble bricks are a type of high-performance lightweight refractory bricks. Their advantages are: low density, good strength, stability, ma...

The problem of cracking of refractory mortars is a complex issue, but many factors are closely related, including production processes, raw materia...